Resetting The Auto Up Feature

Should the Auto Up feature stop working, the window probably needs to be reset. To reset Auto Up: 1. Pull the window switch up to close the window completely and continue to hold the switch up for an additional two seconds after the window is closed.

2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open.

    See also:

    Tire Spinning
    When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels above 30 mph (48 km/h). WARNING! Fast spinning tires can be dangerous. Forces generated by excessive wheel ...

    Electronic Roll Mitigation (ERM)
    This system anticipates the potential for wheel lift by monitoring the driver’s steering wheel input and the speed of the vehicle. When ERM determines that the rate of change of the steering whe ...

    Quadra-Trac I Operating Instructions/Precautions – If Equipped
    The Quadra-Trac I is a single-speed (HI range only) transfer case, which provides convenient full-time fourwheel drive. No driver interaction is required. The Brake Traction Control (BTC) System ...