Parksense Sensors
The four ParkSense sensors, located in the rear fascia/ bumper, monitor the area behind the vehicle that is within the sensors’ field of view. The sensors can detect obstacles from approximately 12 in (30 cm) up to 79 in (200 cm) from the rear fascia/bumper in the horizontal direction, depending on the location, type and orientation of the obstacle.
See also:
Towing With HSA
HSA will provide assistance during acceleration on an
incline while towing a trailer.
WARNING!
• If you use a trailer brake controller with your
trailer, the trailer brakes may be activated a ...
Trailer And Tongue Weight
Always load a trailer with 60% to 65% of the weight in
the front of the trailer. This places 10% to 15% of the
Gross Trailer Weight (GTW) on the tow hitch of your
vehicle. Loads balanced over th ...
Selection Of Engine Coolant
Use only the manufacturer’s recommended engine coolant (antifreeze). Refer to
“Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further
information.
CAUTION!
...


