Vehicles With Rear Web Buckles That May Need To Be Twisted
• In the rear seat, you may have trouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle-end belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out.
• If the belt still can’t be tightened, or if pulling and pushing on the restraint loosens the belt, disconnect the latch plate from the buckle, turn the buckle around, and insert the latch plate into the buckle again. If you still can’t make the child restraint secure, try a different seating position.
See also:
Frequency Of Fluid Change
Under normal operating conditions, the fluid installed at the factory will give
satisfactory lubrication for the life of the vehicle. If the fluid becomes contaminated
with water, it should be cha ...
Engine Break-In Recommendations
A long break-in period is not required for the engine and
drivetrain (transmission and axle) in your vehicle.
Drive moderately during the first 300 miles (500 km).
After the initial 60 miles (100 ...
Buttons 1 - 6
These buttons tune the radio to the channels that you commit to pushbutton memory
(12 Satellite stations). ...