Dial By Saying A Number

• Press the • After the “Ready” prompt and the following beep, say button to begin.

• After the “Ready” prompt and the following beep, say “Dial”.

• The system will prompt you to say the number you want to call.

• For example, you can say “234-567-8901”.

• The Uconnect™ Phone will confirm the phone number and then dial. The number will appear in the display of certain radios.

    See also:

    Oil Change Required
    Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will flash in the EVIC display for approximately 10 seconds after a single chime has so ...

    Fluid Level Check
    Check the fluid level by removing the fill plug. The fluid level should be between the bottom of the fill hole and a point not more than 3/16 in (4.76 mm) below the bottom of the hole. Add fluid, ...

    Spare Tire Removal
    Fit the jack handle extension over the drive nut located in the rear cargo area inside the vehicle. Use the lug wrench to rotate the nut counterclockwise until the spare is on the ground with en ...