To Lower Rear Seat
Either side of the rear seat can be lowered to allow for extended cargo space and still maintain some rear seating room.
NOTE: Be sure that the front seats are fully upright and positioned forward. This will allow the rear seatback to fold down easily.
1. Pull upward on the release lever to release the seat.

Rear Seat Release
NOTE:
• Do not fold the 60% rear seat down with the left
outboard or rear center seat belt buckled.
• Do not fold the 40% rear seat down with the right outboard seat belt buckled.
2. Fold the rear seat completely forward.

Rear Seat Folded
See also:
Hill Descent Control (HDC) — Four-Wheel Drive Models With MP3023 Two-Speed Transfer
Case Only
HDC maintains vehicle speed while descending hills
during off-road driving situations and is available in
4WD LOW range only. To enable HDC, press the HDC
switch or put the Selec-Terrain™ syst ...
Removing ACC Sensor For Off-Roading
NOTE: When off-roading, it may be advisable to remove
the ACC sensor. The sensor is located behind the
front lower grille in the center of the vehicle. After
removing the lower fascia, you may r ...
Seat Belt Pretensioners
The seat belts for both front seating positions are equipped with pretensioning
devices that are designed to remove slack from the seat belt in the event of an
accident. These devices may improve ...


