Halogen Headlamps – If Equipped
1. Open the hood.
2. Turn the low or high beam bulb one–quarter turn counterclockwise to remove from housing.
3. Disconnect the electrical connector and replace the bulb.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.
See also:
Protection
For appearance purposes, you may wish to protect the
acrylic (cloth) top periodically. Afabric protectant such as
Scotchguard is suggested. The top should be clean and
dry before application of ...
3.6-liter Pentastar V-6 Engine
Compact and lightweight, the all-aluminum 3.6-liter Pentastar V-6 engine is
more than 40 kg (90 lbs) lighter than the previous 3.8-liter V-6 engine that was
constructed with a cast-iron block. The ...
Memo
To switch to the voice recorder mode, say “Memo”. In
this mode, you may say the following commands:
• “New Memo” (to record a new memo) — During the
recording, you may press the Voic ...