Vehicles With Rear Web Buckles That May Need To Be Twisted
• In the rear seat, you may have trouble tightening the lap/shoulder belt on the child restraint because the buckle or latch plate is too close to the belt path opening on the restraint. Disconnect the latch plate from the buckle and twist the short buckle-end belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out.
• If the belt still can’t be tightened, or if pulling and pushing on the restraint loosens the belt, disconnect the latch plate from the buckle, turn the buckle around, and insert the latch plate into the buckle again. If you still can’t make the child restraint secure, try a different seating position.
See also:
Adding Washer Fluid
On vehicles equipped with a Electronic Vehicle Information
Center (EVIC), the low washer fluid level will be
indicated. When the sensor detects a low fluid level, the
windshield will light on th ...
Media Center 130 (Sales Code RES)
NOTE: The radio sales code is located on the lower right
side of the radio faceplate.
Media Center 130 (RES) ...
Brake Master Cylinder
The fluid level in the master cylinders should be checked whenever the vehicle
is serviced. If necessary, add fluid to bring level to the full level mark on the
side of the reservoir of the brake ...