Quick Steps For Raising The Soft Top

1. Open the swing gate and raise the top, engaging the Sunrider latches (another person may be needed to help with this operation).

2. Install rear corner panels.

2. Install rear corner panels.

3. Rotate the header forward.

3. Rotate the header forward.

4. Engage the header latches.

4. Engage the header latches.

5. Install the side and back windows.

5. Install the side and back windows.

Folding Down The Soft Top

    See also:

    Sound Horn With Lock
    When on is selected, a short horn sound will occur when the RKE transmitter LOCK button is pressed. This feature may be selected with or without the Flash Lamp with Lock feature. To make your sele ...

    Off-Road Driving Tips
    NOTE: Prior to off-road driving, remove the front air dam to prevent damage. The front air dam is attached to the lower front fascia with seven quarter turn fasteners and can be removed by hand. ...

    Voice Command Button
    Actual button location may vary with the radio. The individual buttons are described in the “Operation” section. The Uconnect™ Phone can be used with any Hands-Free Profile certified Bluetoo ...