Quick Steps For Raising The Soft Top
1. Open the swing gate and raise the top, engaging the Sunrider latches (another person may be needed to help with this operation).
2. Install rear corner panels.
3. Rotate the header forward.
4. Engage the header latches.
5. Install the side and back windows.
See also:
Rear Tail, Stop, Turn Signal, And Backup Lamp
1. Remove the two inboard screws attaching the tail light housing to the body.
DO NOT REMOVE THE OUTER SCREWS AT ANY TIME.
2. Separate the housing from the body by pushing the lamp inboard while ...
Shared Modes
This allows the VES™ to output radio sources to the
headphones and the radio to output VES™ sources to the
vehicle speakers. When the radio and VES™ channel 1 or
2 are in the same (shared) ...
Headlight Delay
To aid in your exit, your vehicle is equipped with a
headlight delay that will leave the headlights on for
approximately 90 seconds. This delay is initiated when
the ignition is turned OFF while ...